Interlogix NX-148E User Manual download pdf (Page 5)

NX-148E LCD Keypad

I. GLOSSARY OF TERMS

Abort Delay: An option that allows a delay in reporting to the central

station.

Authority Level: The level of access an individual has when using an alarm

panel.

Central Station: Location where alarm data is sent during an alarm report.

Chime Feature: An option that allows the keypad to sound a ding-dong

whenever an entry/exit door is opened.

Codes: Can be either User Codes (relating to a person) or Function

Codes (a toggle switch to turn specific functions on/off).

NOTE: A system may have either four (4) digit codes or six

(6) digit codes, but not a mixture of the two.

Duress Code: An option that allows a special code to be sent to the central

station that indicates the alarm system is being operated

under duress.

Forced Arming: An option that allows the system to be turned on (ARMED)

with one or more zones open. A system that is ready to be

“force armed” will flash the ready light. NOTE: Those zones

that are not ready will not create an alarm.

Function Code: A Function Code is either a four (4) or six (6) digit code that has

been programmed by the installer to operate a device.

Group Bypass: An option that allows the user to bypass multiple zones with a

single operation.

Instant/Delay: An option that allows an instant alarm condition for Entry/Exit

doors, or grants a delay to allow someone to enter/exit the

building without an alarm or before entering a user code to

disarm.

Master Code: A master arm/disarm code that can program other user

codes.

Partitioned System: A system divided into multiple areas in which its own user or

users control each area.

Perimeter: The outer edge of the protected area.

Quick Arm: An option that allows you to turn on (ARM) the security

system by pressing either the [STAY] or [EXIT] key on the

keypad control (for ARMING only) as programmed by the

installing company.

User Code: A four (4) or six (6) digit entry used to arm or disarm the

system.

1 2 3 4 5 6 7 8 9 10 ... 29 30

No comments

Interlogix NX-148E User Manual Page 5