Interlogix NX-148E User Manual download pdf (Page 12)

NX-148E LCD Keypad

Select an Option

Press  for Help

Auxiliary Key - If programmed, you can activate the auxiliary alarm by pressing the

Emergency Activation [Auxiliary] key for two seconds. If your system is connected to a

monitoring center, an emergency report could be sent to that center. This key should

only be pressed in an emergency situation requiring response by emergency

personnel.

Police (Panic/Hold-Up) Key - If programmed, when the Emergency Activation [Police]

key is pressed for two seconds, a local audible alarm will sound. If your system is

connected to a monitoring center, an emergency report could be transmitted to that

center. These keys should only be pressed in an emergency situation requiring

immediate response by law enforcement personnel. NOTE: Some Panic/Hold-Up

alarms are programmed to be silent at the protected site while reporting an alarm to

the monitoring center. Check with your installing company to determine how your

security system will respond to the Panic/Hold-Up activation.

FUNCTION MENU

The functions listed below are found in the Function Menu.

Step 1 Press r The display will now begin scrolling though a list of functions and

the corresponding numbers associated with those functions.

Step 2 Press the number listed on the display in order to access that particular

function. Hint: If you already know the function numbers simply press r followed

by the function number.

The following list of menu selections will scroll automatically. NOTE: Some of the

functions are not listed because they are installer level functions. Each time r is

pressed the next menu item will be displayed. Press # to exit to this menu.

This is a sample of the display. The list

below reflects the available functions.

ù=Zone Review 45=Display Test 90=Log Review

0=Set Tone 46=Light Control 91=View Settings

1=Master Mode 49=Español 97=Set Date/Time

2=Service Check 5=User PIN CHIME=Walk Test

3=Alarm Memory 6=User Authority EXIT=Silent Exit

44=Test 7=Detector Reset

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

No comments

Interlogix NX-148E User Manual Page 12