Interlogix NX-148E User Manual download pdf (Page 20)

NX-148E LCD Keypad

This display is reflecting all 8 areas are Ready,

and Area 5 is disarmed. NOTE: If a number is

flashing on the Armed line, that area is armed

Instant. If a number is flashing on the Ready

line, that area is ready to be Force Armed.

If ALL areas are disarmed and ready to arm,

this display will appear on the LCD screen.

 ARMING AND DISARMING MULTIPLE PARTITIONS

To arm/disarm multiple partitions, enter a code that has arm/disarm authority for ALL

of the partitions to be armed/disarmed. The following display will appear on the LCD

screen.

The numbers on the top line represent the

disarmed areas to which this code has access.

The numbers on the bottom line represent the

areas that are armed. Refer to the following

table for possible conditions.

LCD DISPLAY FOR AREA

TOP LINE OVER BOTTOM LINE

CONDITION

Blank

Area Not used or Authorized

Dash (-)

Area Not Ready

Flashing Area #

Dash (-)

Area Ready to Force Arm

Dash (-)

Flashing Area #

Area Armed Instant

Area #

Dash (-)

Area Disarmed & Ready to Arm

Dash (-)

Area #

Area is Armed

 To disarm all of these areas, press • .

 To arm all of these areas, press – .

 To toggle a single area between the armed and disarmed conditions, press

[][Area number]. For example: If Area 4 is armed, [] [4] will disarm Area 4.

If Area 4 is disarmed, [] [4] will arm it.

 Press [STAY] during the exit delay to bypass all interior zones in the exit delay.

 To control the individual areas, refer to the following section.

Ready 12345678

Armed 1234-678

System Ready

Type code to arm

12-45-78 Disarm º

--3 67- Arm º

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 29 30

Comments to this Manuals

No comments

Interlogix NX-148E User Manual Page 20

Comments to this Manuals

Related products and manuals for Safety Interlogix NX-148E