Interlogix NX-148E User Manual download pdf (Page 21)

NX-148E LCD Keypad

 OPERATING INDIVIDUAL AREAS IN THE MULTI-PARTITION MODE

Enter a code that is a valid arm/disarm code for the area you wish to operate. The

following display will appear on the LCD screen.

Only the areas authorized by this code will

appear.

To toggle between the armed and disarmed states of an individual area, press [r]

[Area number].

To operate an individual area, enter the number of the partition you wish to operate.

The LCD keypad will now operate as a single area keypad. All keys and functions

entered will affect this individual partition only. The lights and display represent the

status of that partition only. The word "System" will be replaced with the word "Area

#". The following is an example of this feature. To exit this screen, press [#].

Area 5 is selected and Area 5 is ready to arm.

To exit the individual partition mode, enter [#]-

[#].

 SILENCING ALARMS IN THE MULTI-PARTITION MODE

If the keypad is sounding an alarm or the siren is running, it can be silenced by

entering a code with the authority for the area(s) that are in alarm. NOTE: The

[EXIT], [BYPASS], and [STAY] keys will only work if an individual partition is selected.

12-4—78 Disarm º

--3-56-- Arm º

Area 5 Ready

Type code to arm

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 29 30

No comments

Interlogix NX-148E User Manual Page 21