Interlogix TruVision 960H Premium Resolution Series PTZ Camer User Manual download pdf (Page 13)

EN 13 TruVision Analog PTZ Camera

Address settings

DIP switch SW1 is used to set the address of the PTZ dome. See

Table 1 below to set the PTZ camera address to a specific number.

Table 1: PTZ camera addresses

Address

1 2 3 4 5 6 7 8

0 OFF OFF OFF OFF OFF OFF OFF OFF

1 ON OFF OFF OFF OFF OFF OFF OFF

255 ON ON ON ON ON ON ON ON

Baud rate settings

Use positions 1, 2, and 3 of DIP switch SW2 to set the baud rate of the

PTZ dome. The values to select are 2400 bps, 4800 bps, 9600 bps,

19200 bps and 38400 bps. The default baud rate is 2400 bps. See

Table 2 below.

Table 2: Baud rate values

Baud rate 1 2 3

2400 ON OFF OFF

4800 OFF ON OFF

9600 ON ON OFF

19200 OFF OFF ON

38400 ON OFF ON

Protocol Settings

Use positions 4, 5, and 6 of DIP switch SW2 to set the communication

protocols of the dome. See Table 3 below.

Table 3: Protocol values

Protocol 4 5 6

Interlogix-485 OFF OFF OFF

PELCO-D ON OFF OFF

PELCO OFF ON OFF

Reserved Others

1 2 ... 8 9 10 11 12 13 14 15 16

No comments

Interlogix TruVision 960H Premium Resolution Series PTZ Camer User Manual Page 13