TruVision 12/32 Series IP Camera Installation Guide P/N 1072880-EN • REV B • ISS 08JAN15
6 Installation Guide IP VF bullet camera Camera Back box Template Alarm connector (2 pcs) Screws M4.8 × 18, 4pcs to attach the back
Installation Guide 7 Water joint: provide water resistance to network connection. Video cable CD with Configuration manual and TruVision
8 Installation Guide IP VF dome camera Camera Adaptor: for TVD-CB3 cup base Template 12 VDC Connector: DC jack socket to terminal con
Installation Guide 9 Water joint: provide water resistance to network connection. Screws (4 pcs) Screws C: M4×8, 3pcs Alarm conn
10 Installation Guide IP VF outdoor dome camera Camera Back box Template (flush mount) Template (back box) Screws(4 pcs) Screw
Installation Guide 11 Alarm connector(4 pcs) Water joint: provide water resistance to network connection. Installation manual CD with
12 Installation Guide Cable requirements For proper operation, adhere to the following cable and power requirements for the cameras. Category 5 cabli
Installation Guide 13 Camera description Figure 1: IP bullet camera 1. Ethernet RJ45 PoE port 2. Power supply 3. Reset button 4. SD card 5. BNC p
14 Installation Guide Note: 1. To reset the camera to default settings, you need to press and hold the RESET button and power on the camera. After t
Installation Guide 15 Figure 2: IP VF bullet camera 1. Shield 2. Mounting base 3. Back box 4. Reset button 5. SD card slot 6. Lens co
Copyright © 2015 United Technologies Corporation, Interlogix is part of UTC Building & Industrial Systems, a unit of United Technologies Cor
16 Installation Guide Figure 3: IP VF dome camera 1. Dome liner 2. Bubble Assembly 3. Ethernet RJ45 4. Power cable 5. Alarm cable 6. Lens 7
Installation Guide 17 Figure 4: IP VF outdoor dome camera 1. Dome liner 2. Bubble Assembly 3. SD card 4. Analog video output 5. Reset bu
18 Installation Guide To quickly put the camera into operation: 1. Prepare the mounting surface. 2 Mount the camera on the mounting surface using
Installation Guide 19 Accessing the SD card Insert a Micro SD card with up to 64GB for local storage as a backup in case, for example, the network
20 Installation Guide 3. Hook the camera to the back box with the safety cable. Use the screws to fix the camera to the back box. Mounting the VF
Installation Guide 21 Screws 2. Open the lower dome and remove the black inner liner. 3. Using the drill template, drill three holes in the m
22 Installation Guide Cable hole Screw holes 4. If you want to route the cables behind the dome, drill a cable hole in the ceiling or wall using
Installation Guide 23 6. Route the cables through the side hole of the dome by removing the cover. 7. Connect the video output connector to the
24 Installation Guide Tilting Rotation Rotation
Installation Guide 25 Mounting the outdoor dome camera To mount the outdoor dome camera on a ceiling: 1. Drill the screw holes on the ceiling with
ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-0330 du Canada. European Union directives 12004/108/EC (EMC directive):
26 Installation Guide 5. Install the dome camera to the mounting base. 5. Adjust the surveillance angle. 1) Loosen the lock screw besides the
Installation Guide 27 2) Hold the plastic plate and rotate the camera to adjust the panning angle [0~350°]. 3) Push the lens forward and backward
28 Installation Guide To mount the outdoor dome camera into a ceiling: 1. Drill the screw holes on the ceiling with the supplied drilling template.
Installation Guide 29 4. Re-attach the housing and liner.
30 Installation Guide Using the camera with an Interlogix NVR or Hybrid DVR or another system Please refer to the NVR/DVR user manuals for instructio
Installation Guide 31 Dimensions 69.8 × 58 × 145 mm (2.68” x 2.56” x 5.70 in.) Weight 830g (1.83 lbs.) TruVision IP VF mini dome Electrical Volt
32 Installation Guide TruVision IP VF bullet cameras Electrical Voltage input 12 VDC, PoE (IEEE 802.3af) Power consumption 1.3MPX: Max. 12 W 3MPX:
Installation Guide 33 Operating temperature -30 to +60°C (-22 to +140°F) -40 to +60°C (-40 to +140°F), with heater on Dimensions Φ 159.8 × 146 mm
34 Installation Guide Figure 6: Cross-over cable 1 White/Orange White/Orange 1 2 Orange Orange 2 3 White-Green White-Green 3 4 Blue Blue 4 5 Whi
Installation Guide 1 Content Introduction 2Product overview 2Installation 3Installation environment 3Package contents 4Cable requirem
2 Installation Guide Introduction Product overview This is the installation guide for TruVision 12/32 Series IP camera models: TVC-1201 (1.3MPX I
Installation Guide 3 TVD-3203 (1.3MPX IP outdoor dome, 2.8-12mm, NTSC) TVD-1204 (3MPX IP outdoor dome, 2.8-12mm, PAL) TVD-3204 (3MPX IP
4 Installation Guide immediately if the camera is wet and ask a qualified service person for servicing. Moisture can damage the camera and also creat
Installation Guide 5 IP box camera Camera C-CS adaptor CD with Configuration manual and TruVision Device Finder Installation manual
Comments to this Manuals