Interlogix TruVision IP Open Standards Dome Cameras Installat User Manual

TruVision Indoor IP Dome Installation Manual P/N 1072625A-EN • REV 1.0 • ISS 10APR13

EN 10 Installation Manual Figure 6: SDHC card slot location in the dome cameras SDHC card slot Mounting the dome cameras on a ceiling Mount the do

Installation Manual 11 EN 3. In the middle of the mounting plate make a hole in the ceiling to access the cabling. 4. If needed, seal all mounti

EN 12 Installation Manual RCA video output connector Video cable for testing (supplied) Lens adjustment screw 10. Remove the temporary video cable

Installation Manual 13 EN 3. Pull the camera’s cabling through the ceiling hole and connect to the devices and power. If needed, seal all mountin

EN 14 Installation Manual Using the camera with an Interlogix NVR or Hybrid DVR or another system Please refer to the NVR/DVR user manuals for instr

Installation Manual 15 EN Operating temperature -10 to +60°C (14 to 140°F) Environmental rating Indoor vandal-resistant PC requirements Intel-base

EN 16 Installation Manual PC requirements Intel-based PC 1 GHz or faster Memory I GB RAM Operating system Windows® XP, Vista or Windows 7 CGI D

Copyright © 2013 UTC Fire & Security Americas Corporation, Inc. Interlogix is part of UTC Climate Controls & Security, a unit of United Te

Installation Manual 3 EN Content Introduction 3Product overview 3Features 4Installation 4Installation environment 4Package contents

EN 4 Installation Manual  TruVision IP wedge dome: TVD-M1210W-2-N(-P) (1.3 megapixel) TVD-M1210W-2W-N(-P) (1.3 megapixel) TVD-N210W-4-N(-P) (

Installation Manual 5 EN • Moisture: Do not expose the camera to rain or moisture, or try to operate it in wet areas. Turn the power off immediatel

EN 6 Installation Manual Cable type Requirements Power 12 VDC cable Camera description Figure 1: IP dome and IR dome cameras Figure 2: IP wedge d

Installation Manual 7 EN 3. Mount the camera to the ceiling using the appropriate fasteners. See “Mounting the dome cameras on a ceiling” on page 1

EN 8 Installation Manual Figure 3: Connections on the base of the dome and IR dome cameras 1. Ground Connect to ground. 2. Ethernet RJ45 PoE port

Installation Manual 9 EN Figure 4: External alarm output Wedge dome camera connections Figure 5: Wedge dome camera connections 1. Power input con