Interlogix DVR 11 User Manual User Manual download pdf (Page 45)

5BChapter 6: Network settings

TruVision DVR 11 User Manual 39

Configuring the server and HTTP ports

You can change the server and HTTP ports from the default settings in the

Network Settings window. The default server port is 8000 while that of the default

HTTP port is 80.

Note: The server port has a port range of 2000 to 65535 and is used for remote

client software access. The HTTP port is used for remote internet browser

access.

To change the default ports:

1. Click the Network Settings icon in the menu toolbar and then click More

Settings.

2. Enter the new Com Port and HTTP Port values.

Configuring the RTSP service port

The RTSP (Real Time Streaming Protocol) is a network control protocol

designed for use in entertainment and communications systems to control

streaming media servers.

To configure RTSP service port:

1. Click the Network Settings icon in the menu toolbar and then click More

Settings.

2. Enter the RTSP port value. The default value 554.

3. Click Apply to save the settings.

Checking network status

You can easily check network traffic in order to obtain information about the DVR

such as its linking status, MTU, sending/receiving rate, MAC address, and NIC

type.

You can also check the network connection status by testing its delay and packet

loss.

To check network traffic:

1. Click the System Settings icon in the menu toolbar and then click Net detect

to display the Traffic window. The information displayed is refreshed once a

second.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 155 156

No comments

Interlogix DVR 11 User Manual User Manual Page 45