Interlogix DVR 11 User Manual User Manual download pdf (Page 20)

2BChapter 3: Getting started

14 TruVision DVR 11 User Manual

Using the setup wizard

The TVR 11 has an express installation wizard that lets you easily configure

basic DVR settings when first used. It configures all cameras simultaneously.

The configuration can then be customized as required.

By default the setup wizard will start once the DVR has loaded. It will walk you

through some of the more important settings of your DVR.

Any changes you make to a setup configuration page are saved when you exit

the page and return to the main wizard page.

Note: If you want to set up the DVR with default settings only, click Next in each

screen until the end.

To quickly set up the DVR:

1. Connect all the devices required to the back panel of the DVR. See Figure 1

on page 5.

2. Turn on the unit using the power switch on the front panel. After the boot up

screen, the DVR displays video images on screen.

3. Select the preferred language for the system from the dropdown list and then

click Next.

4. Enable or disable the option to start the wizard automatically when the DVR is

turned on. Click Next.

5. Administrator configuration:

Navigate to the Admin Password edit box and click the edit box with the

mouse, or press Enter on the front panel or remote control, to display the

virtual keyboard. Enter the default admin password, 1234.

Note: You must enter an admin password. To change the Admin password,

check New Admin password and enter the new password and confirm it.

Caution: It is strongly recommended that you change the password of the

administrator. Do not leave 1234 as the default password. Write it down in a

safe place so that you do not forget it.

If you should forget the password to your DVR, contact your supplier with the

serial number of your DVR to obtain a secure code to reset it.

Click Next.

6. Time and date configuration:

Select the desired time zone, date format, system time, and system date.

Note: Daylight savings time (DST) cannot be configured from the Wizard. See

“Configuring time and date” on page 65 for more information on DST.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 155 156

No comments

Interlogix DVR 11 User Manual User Manual Page 20