Interlogix Simon XT User Manual User Manual download pdf (Page 34)

28 Simon XT User Manual

• Access codes

• Security

• Phone #s

• Timers

• Siren options

• Light control

• System tests

The sections below describe the options that you can program in the System

programming menu.

Access codes

There are three types of access codes: master, user, and duress.

Master code

The master code is your most powerful code and can be used for all user

operations including programming. To change the master code, do the following:

1. Enter the System programming menu.

2. Scroll up/down to Access codes, then press Enter.

3. Scroll up/down to Master code, then press Enter.

4. The current value of the code now flashes.

5. Enter a new code (use correct length), then press Enter.

6. Press Status repeatedly to exit.

The initial value of the master code is 123, 1234, 12345, or 123456, depending

on the installer-programmed access code length.

User codes 1 to 8

There are eight user codes, which can be used for many user operations, but not

subdisarming, programming, or bypassing sensors.

To change a user code, do the following:

1. Enter the System programming menu.

2. Scroll up/down to Access codes, then press Enter.

3. Scroll up/down to the user code you want to change, then press Enter.

4. The current value of the code now flashes.

5. Enter a new code (use correct length), then press Enter.

6. Press Status repeatedly to exit.

Initially, all user codes are blank. A user code can be deleted by pressing Disarm

while the code is being changed.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 49 50

No comments

Interlogix Simon XT User Manual User Manual Page 34