Interlogix Simon XT User Manual User Manual download pdf (Page 32)

26 Simon XT User Manual

1. Scroll up/down until the display reads Light Schedules.

2. Press Enter. The current setting will flash.

3. Scroll up/down to toggle scheduled lights On/Off.

4. Press Enter. The setting will stop flashing.

5. Press STATUS to exit.

A clock icon appears in the display when scheduled lights are enabled.

Note: This feature is not verified for use by UL. This menu option will not appear

if no light schedules are defined.

Sensor lights

Simon XT automatically turns certain lights on or off when certain sensors are

tripped. For example, you can set a basement light to turn on when the door to

the basement is opened. You can associate sensors with lights in menu item

System programming / Light control / Sensor light. See Light control (optional)

on page 14.

To enable or disable sensor-activated lights:

1. Scroll up/down until the display shows Sensor Lights.

2. Press Enter. The current setting will flash.

3. Scroll up/down to toggle the sensor-activated lights On/Off.

4. Press Enter. The setting will stop flashing.

5. Press STATUS to exit.

A light-bulb icon will appear in the display when Sensor lights are enabled.

Note: This feature is not verified for use by UL. This menu option will not appear

if no sensor lights have been defined.

Chime

To enable or disable the Chime feature:

1. Scroll up/down until the display shows Chime.

2. Press Enter. The current setting will flash.

3. Scroll up/down to toggle Chime on/off.

4. Press Enter. The setting will stop flashing.

5. Press STATUS to exit.

A solid bell icon will appear in the display when Chime is enabled.

Note: This menu option will not appear if no chime sensors are in your system

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 49 50

No comments

Interlogix Simon XT User Manual User Manual Page 32