Interlogix NS2503-24P/2C Installation Guide User Manual

P/N 1072575 • REV 00.05 • ISS 30JAN13 IFS NS2503-24P/2C Quick Installation Guide

IFS NS2503-24P/2C Quick Guide 10 Figure 7: Web Main Page Screenshot 4. The Switch Menu on the left of the Web page let you access all the commands

IFS NS2503-24P/2C Quick Guide 11 Contacting Technical Support Contact technical support if you encounter any difficulties during this installation. Pl

Copyright © 2013 UTC Fire & Security Americas Corporation, Inc. Interlogix is part of UTC Climate Controls & Security, a unit of Unite

IFS NS2503-24P/2C Quick Guide 3TABLE OF CONTENTS IFS NS2503-24P/2C QUICK INSTALLATION GUIDE...1 I

IFS NS2503-24P/2C Quick Guide 4 Introduction The IFS Layer 2 Managed Switch NS2503-24P/2C has 24 10/100Mbps 802.3at compliant PoE ports, with two Gi

IFS NS2503-24P/2C Quick Guide 5 Figure 1: Console Management Diagram A terminal program is required to make the software connection to the Managed S

IFS NS2503-24P/2C Quick Guide 6Login in the Console Interface Once the terminal has connected to the device, turn on the Managed Switch, and the te

IFS NS2503-24P/2C Quick Guide 7 3. The screen displays the current IP address, Subnet Mask and Gateway. As show in Figure 4. Figure 4: Show IP infor

IFS NS2503-24P/2C Quick Guide 8 Figure 5: Set IP address Screenshot 2. Repeat Step 1 to check if the IP address is changed. If the IP is successful

IFS NS2503-24P/2C Quick Guide 9 The Managed Switch can be configured through an Ethernet connection, make sure the manager PC must be set on same the