NS3500-28T-4S Quick Start Guide
- 10 - 7. Starting Web Management The following shows how to st art up the Web Management of the Managed Swi
117.2 Logging in the Managed Switch 1. Use Internet Explorer 8.0 or above W eb browser and enter IP addres
- 12 - 3. After entering the password, the main screen appears as Figure 3-3 shows. Fig
- 13 - The Switch Menu on the left of the Web page lets you access all the commands and statistics the Manage
- 14 - 8. Saving Configuration via the Web In the Managed Switch, the running configuration file stores in th
159. Recovering Back to Default Configuration IP Address has been changed or admin password has been forgotten – To reset the IP address to the
- 16 - 10. Customer Support Thank you for purchasing INTERLOGIX products. You can browse our online FAQ
- 2 - Copyright © 2014 United Technologies Corporation Interlogix is par
- 3 - Table of Contents 1. PACKAGE CONTENTS...
- 4 - 1. Package Contents Thank you for purchasing NS3500-28T-4S - 28-Por
- 5 - 2. Requirements Workstations running Windows XP/2003/Vista/7/8/20
- 6 - 3. Terminal Setup To configure the system, connect a serial cable t
- 7 - 4. Logon to the Console Once the terminal is connected to the dev
- 8 - 5. Configuring IP Address via the Console The Managed Switch is shi
95. Repeat Step 1 to check if the IP address is changed. If the IP is successfully configured, the Managed Switch will apply the new IP address set
Comments to this Manuals