Interlogix NS3550-8T-2S Installation Guide User Manual

IFS NS3550-8T-2S Quick Installation Guide P/N 1072772 • REV A • ISS 24JUN14

10 TROUBLESHOOTING Resetting the IP address and Admin Password To reset the IP address to the default IP Address “192.168.0.100” or reset the passwo

11 Contacting Technical Support Contact technical support if you encounter any difficulties during this installation. Please make sure you have the

12MobileView Support [email protected] MobileView Tech Support [email protected] EMEA Support By Phone +32 (0)2 725 1120 By Mail EME

2Copyright © 2014 United Technologies Corporation, Inc. Interlogix is part of UTC Building & Industrial Systems, a unit of United Technologies

3 TABLE OF CONTENTS IFS NS3550-8T-2S Quick Installation Guide... 1 TABLE OF

4INTRODUCTION The IFS NS3550-8T-2S is an 8 port Gigabit Industrial Switch with 2 SFP fiber ports and robust layer 2 features. Package Contents Open t

5 Wiring the Power Input The 6-contact terminal block connector on the rear panel of NS3550-8T-2S is used for two DC redundant powers inputs. Please

6 Starting Web Management This section introduces the configuration and functions of the Web-Based management. About Web-based Management The Ind

7 Figure 1: Web Management Diagram  Logging into the switch 1. Use Internet Explorer 7.0 or above Web browser. Enter the factory-default IP add

8 Figure 3: Default Main Page 1. It is recommended to use Internet Explore 7.0 or above to access Industrial Managed Switch. 2. If the IP addre

9 Main Menu Using the onboard web agent, you can define system parameters, manage and control the Industrial Managed Switch, and all its ports, or