Interlogix NX-4V2 User Manual User Manual Page 15
- Page / 21
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
NX-4V2 LED Keypad User Manual 11
Assigning user code authority levels
Assign authority levels to users by following the steps below. Assign user codes
before assigning authority levels. Your system must be in the disarmed state to
change user code authority levels.
1. Press [*]-[6].
2. Enter a “Master Arm/Disarm Code”.
3. The ready light will flash.
4. Enter the 2-digit user number. Always use leading zeros when necessary, i.e.
"004" for user number 4.
5. Lights illuminated indicate the authority levels assigned to this code. An
explanation of the lights is listed below. You may toggle (turn on/off) the
authority level by pressing the number for that authority level (see Table 3
below).
Table 3: Authority levels
Ligh
t
Authority level if light 8 is off
1
Reserved (Note: Do not change if on.)
2
Arm Only
3
Arm Only After Close Window
4
Master Arm/Disarm (can program other codes)
5
Arm/Disarm
6
Bypass Zones
7
Open / Close Reporting
8
If this light is on, the code is programmed as a function code. Do not change, Press [#] - [#]
to exit.
6. Press [∗][∗]. This returns you to Step 3 previously mentioned. At this point
you may enter another user number to assign authority level. Repeat Steps 4
- 6 until you have assigned authority levels to all user numbers.
7. Press the [#] key to exit the Assigning Authority Level Program.
Other keypad functions
Setting the keypad tone
1. Press [∗]-[0]. Keypad is now in the “Adjust Tone” mode.
- Content 3
- Security system notes 5
- Introduction 6
- Glossary of terms 8
- Understanding the lights 9
- Emergency activation keys 10
- Keypad functions 10
- Disarming the system 12
- Bypassing zones 13
- Group bypass 13
- Unbypassing 13
- Other keypad functions 15
- ∗]-[9]-[6] 17
- ∗]-[9]-[7] 17
- Service menu 18
- Emergency evacuation plans 20
- System notes 21
Related products and manuals for Control panel Interlogix NX-4V2 User Manual
Control panel Interlogix NX-6 User Manual
(18 pages)
(18 pages)
Control panel Interlogix NX-8 User Manual
(61 pages)
(61 pages)
Control panel Interlogix NX-8 User Manual
(18 pages)
(18 pages)
Samsung PALADIN manuály
Uživatelské manuály a uživatelské příručky pro Prázdné DVD Samsung PALADIN.
Poskytujeme 1 manuály pdf Samsung PALADIN ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comments to this Manuals