Interlogix AP950PI User Manual download pdf

AP950PI PIR Detector Installation Instructions

Description

The AP950PI is a passive infrared motion detector that is

highly sensitive to moving infrared sources. It features superior

immunity to RFI, vibration, static electricity, temperature

changes, and other false alarm sources.

The unit provides jumper-selectable sensitivity, mode, and LED

settings. The unit is designed to accept either the pet immune

or the standard mirror. The masks included allow the coverage

pattern to be modified for a wide variety of applications.

Figure 1: Exploded view

Hinge tabs

Front housing

LED

Window

Cable entry knockout

Corner mounting knockout

Flat wall mounting

knockout

Back housing

Flat wall mounting knockout

Slot for opening tab

Note: This knockout

is not for use with the

AP950PI

Parts

The following parts are included:

• PIR detector with pet immune mirror installed

• Standard mirror

• Two plastic masks

• Sheet of adhesive masking labels

• Cardboard undercrawl window mask

• One screw to secure the housings

Figure 2: Detections pattern

10.0 ft.(3.0m) maximum

8.0 ft.(2.4m) typical

7.0 ft. (2.1m) minimum

8 ft. (2.4m)

25 ft. (7.6m)

35 ft. (10.7m)

Note: The maximum range is 35 feet (10.7m) with pet immune

mirror and Standard Sensitivity selected. The maximum range

is 50 feet (15.2m) with standard mirror and Increased

Sensitivity selected. See “Setting the sensitivity, mode, and

LED jum

pers” on page 3.

Selecting a location

• The unit can be mounted from 7 to 10 feet (2.1 to 3.0m)

high except for pet alley application (see Pet Alley

Application), but for optimum detection and pet immunity,

mount the unit between 7 and 8 feet (2.1 and 2.4m) high.

• Mount the unit on a rigid vibration-free surface.

• Mount the unit so the expected movement of an intruder is

across the fields of the detection pattern. See Figure 2

above.

•

Do not locate the unit on a surface exposed to moisture.

• Do not locate the unit where it may be exposed to false

alarm sources, such as:

• direct sunlight

• heat sources (heaters, radiators, etc.) in the field of

view

• strong air drafts (fans, air conditioners, etc.) on unit

P/N 1037263 • REV C • 16MAY11 1

1 2 3 4

Summary of Contents

Page 1 - Selecting a location

AP950PI PIR Detector Installation Instructions Description The AP950PI is a passive infrared motion detector that is highly sensitive to moving infra

Page 2 - 2 34567 8

• Do not locate the unit where the ambient temperature is below 0° F (-18°C) or above 122°F (50°C). • Do not aim the unit at windows or glass doors.

Page 3

Setting the sensitivity, mode, and LED jumpers The unit provides three jumpers to set sensitivity, mode, and the LED. See Figure 3 on page 2. Figure 7

Page 4

Figure 10: Pet alley Specifications 3.5 ft.(1.1m) Input voltage 8.2 to 15VDC Input voltage (UL) 9.7 to 13.6 VDC Peak to peak ripple 2V max at 12VDC

Comments to this Manuals

No comments

Interlogix AP950PI User Manual

Browse online or download User Manual for Hardware Interlogix AP950PI. Interlogix AP950PI User Manual [es] [en] [fr]

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Interlogix AP950PI